View MUR24006_1286155.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MUR240
Preferred Device
SWITCHMODEt Power Rectifier
These state-of-the-art devices are designed for use in switching power supplies, inverters and as free wheeling diodes.
Features http://onsemi.com
* * * * * *
Ultrafast Recovery Times 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction These are Pb-Free Devices*
ULTRAFAST RECTIFIER 2 AMPERES, 400 VOLTS
Mechanical Characteristics:
* Case: Epoxy, Molded * Weight: 0.4 Gram (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Lead Temperature for Soldering Purposes: * * *
260C Max. for 10 Seconds Polarity: Cathode Indicated by Polarity Band Shipped in Plastic Bags; 1,000 per Bag Available Tape and Reel; 5,000 per Reel, by Adding a "RL'' Suffix to the Part Number Leads are Readily Solderable
PLASTIC AXIAL LEAD CASE 59
MARKING DIAGRAM
MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Note 1) (Square Wave Mounting Method #3 Per Note 3) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) IFSM Value 400 - 2.0 @ TA = 85C 35 Unit V
A MUR240 YYWW G G
A A
A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location)
TJ, Tstg
-65 to +175
C
ORDERING INFORMATION
Device MUR240 Package Axial Lead** Axial Lead** Axial Lead** Axial Lead** Shipping 1000 Units/Bag 1000 Units/Bag 5000/Tape & Reel 5000/Tape & Reel
THERMAL CHARACTERISTICS
Characteristic Maximum Thermal Resistance, Junction-to-Ambient Symbol RqJA Value See Note 3 Unit C/W
MUR240G MUR240RL MUR240RLG
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. **This package is inherently Pb-Free.
Preferred devices are recommended choices for future use and best overall value.
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
(c) Semiconductor Components Industries, LLC, 2006
1
July, 2006 - Rev. 6
Publication Order Number: MUR240/D
MUR240
ELECTRICAL CHARACTERISTICS
Characteristic Maximum Instantaneous Forward Voltage (Note 2) (IF = 2.0 Amp, TJ = 150C) (IF = 2.0 Amp, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TJ = 150C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/ms) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. Symbol VF 1.05 1.30 IR 150 5.0 trr 65 trr 50 ns ns mA Value Unit V
10
10
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
VF @ 175C 100C 25C 1.0
VF @ 175C 25C
100C
1.0
0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VF, INSTANTANEOUS VOLTAGE (VOLTS)
0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage
Figure 2. Maximum Forward Voltage
http://onsemi.com
2
MUR240
1000 IR, REVERSE CURRENT (m A) IR @ 175C 100 100C 10 25C 1.0 IR, REVERSE CURRENT (m A) 100 IR @ 175C 10 100C
1.0
0.1
25C
0.01
0.1 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS)
0.001 0 100 200 300 400 VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Maximum Reverse Current
PF(AV), AVERAGE POWER DISSIPATION (WATTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Typical Reverse Current
5.0
2.5 SQUARE WAVE 2.0 dc
4.0
3.0
1.5
2.0 SQUARE WAVE
dc
1.0
1.0 0 0
0.5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 IF(AV), AVERAGE FORWARD CURRENT (AMPS)
50
100
150
200
TA, AMBIENT TEMPERATURE (C)
Figure 5. Current Derating
Figure 6. Power Dissipation
30 TJ = 25C 25 C, CAPACITANCE (pF) C, CAPACITANCE (pF) 20 15 10 5.0 0 0 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS)
35 30 TJ = 25C 25 20 15 10 5.0 0 0 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Capacitance
Figure 8. Maximum Capacitance
http://onsemi.com
3
MUR240
NOTE 3. - AMBIENT MOUNTING DATA
Data shown for thermal resistance, junction-to-ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L 1/8 1/4 1/2 52 65 72 67 80 87 50 Units C/W C/W C/W
MOUNTING METHOD 1
L
L
EEEEEEEEEEE EEEEEEEEEEE
MOUNTING METHOD 2
L L
EEEEEEEEEEEE
Vector Pin Mounting MOUNTING METHOD 3
EE EE EE EE EE EE EE
L = 3/8
Board Ground Plane
P.C. Board with 1-1/2 X 1-1/2 Copper Surface
http://onsemi.com
4
MUR240
PACKAGE DIMENSIONS
AXIAL LEAD CASE 59-10 ISSUE U
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 --- 0.050 1.000 --- MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 --- 1.27 25.40 ---
K F
D
DIM A B D F K
A
POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES)
F K
STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
5
MUR240/D

▲Up To Search▲

Price & Availability of MUR24006

	To Download MUR24006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .